How to make your block home more efficient
ener
This is how the house looked before
we started.
Dated by the slump block and
70's trim ths home was inefficient and uncomfortable.
Wood firring strips to create an airspace. Typically, the radiant barrier is applied first then the firring strips.
Then we
applied Thermal Control Membrane over the firring strips.
Stucco foam is then
applied
Over the stucco foam we applied a
skip coat of stucco. The stucco is allowed to cure for several days and
then is ready for the final coat.
Here is the finished product. Efficient, updated and very comfortable. The complete job was under $6,000. The final stucco coat is colored stucco so there is no need to paint the exterior.
If you want to do it yourself we can supply you with the products and step by step instructions.
Outsulation is a very good way to keep heat from entering your walls. This application is much easier on commercial buildings since there are less things to deal with like outdoor faucets, arched windows, door bells, light sockets and so on.
For more energy saving
ideas please visit our home page.
click
here
To contact us via email click here